What is Cygserver? Cygserver is a program which is designed to run as a background service. It provides Cygwin applications with services which require security arbitration or which need to persist while no other cygwin application is running. The implemented services so far are: - Control slave tty/pty handle dispersal from tty owner to other processes without compromising the owner processes' security. - XSI IPC Message Queues. - XSI IPC Semaphores. - XSI IPC Shared Memory. Cygserver command line options: Options to Cygserver take the normal UNIX-style `-X' or `--longoption' form. Nearly all options have a counterpart in the configuration file (see below) so setting them on the command line isn't really necessary. Command line options override settings from the Cygserver configuration file. The one-character options are prepended by a single dash, the long variants are prepended with two dashes. Arguments to options are marked in angle brackets below. These are not part of the actual syntax but are used only to denote the arguments. Note that all arguments are required. Cygserver has no options with optional arguments. The options recognized are: -f, --config-file Use as configuration file instead of the default configuration line. The default configuration file is /etc/cygserver.conf, typically. The --help and --version options will print the default configuration pathname. This option has no counterpart in the configuration file, for obvious reasons. -c, --cleanup-threads Number of threads started to perform cleanup tasks. Default is 2. Configuration file option: kern.srv.cleanup_threads -r, --request-threads Number of threads started to serve application requests. Default is 10. The -c and -r options can be used to play with Cygserver's performance under heavy load conditions or on slow machines. Configuration file option: kern.srv.request_threads -p, --process-cache Number of processes which can connect concurrently to cygserver. Default is 62. Each process connected to cygserver is a synchronization object which has to be maintained. The data structure to maintain these processes is the so-called "process cache". In theory, an arbitrary number of processes could connect to cygserver, but due to the need to synchronize, the higher the number of connected processes, the more synchronization overhead exists. By using this option, you can set an upper limit to the synchronization effort. If more than 62 processes try to connect to cygserver concurrently, two additional synchronization threads are necessary, and one for each further 62 concurrent processes. So, useful values for the --process-cache option are 62, 124, 186, 248, 310. 310 is the maximum value. Configuration file option: kern.srv.process_cache_size NOTE: The number of child processes of a single parent process is limited to 256. So in case of taking advantage of a process cache size beyond 256, keep in mind that not all of these processes can be child processes of one single parent process. -d, --debug Log debug messages to stderr. These will clutter your stderr output with a lot of information, typically only useful to developers. -e, --stderr Force logging to stderr. This is the default if stderr is connected to a tty. Otherwise, the default is logging to the system log. By using the -e, -E, -y, -Y options (or the appropriate settings in the configuration file), you can explicitely set the logging output as you like, even to both, stderr and syslog. Configuration file option: kern.log.stderr -E, --no-stderr Don't log to stderr. Configuration file option: kern.log.stderr -y, --syslog Force logging to the system log. This is the default, if stderr is not connected to a tty, e. g. redirected to a file. Note, that on 9x/Me systems the syslog is faked by a file C:\CYGWIN_SYSLOG.TXT. Configuration file option: kern.log.syslog -Y, --no-syslog Don't log to syslog. Configuration file option: kern.log.syslog -l, --log-level Set the verbosity level of the logging output. Valid values are between 1 and 7. The default level is 6, which is relatively chatty. If you set it to 1, you will get only messages which are printed under severe conditions, which will result in stopping Cygserver itself. Configuration file option: kern.log.level -m, --no-sharedmem Don't start XSI IPC Shared Memory support. If you don't need XSI IPC Shared Memory support, you can switch it off here. Configuration file option: kern.srv.sharedmem -q, --no-msgqueues Don't start XSI IPC Message Queues. Configuration file option: kern.srv.msgqueues -s, --no-semaphores Don't start XSI IPC Semaphores. Configuration file option: kern.srv.semaphores -S, --shutdown Shutdown a running daemon and exit. Other methods are sending a SIGHUP to the Cygserver PID or, if running as service under NT, calling `net stop cygserver' or `cygrunsrv -E cygserver'. -h, --help Output usage information and exit. -v, --version Output version information and exit. How to start Cygserver: Before you run Cygserver for the first time, you should run the /usr/bin/cygserver-config script once. It creates the default configuration file and, upon request, installs Cygserver as service when running under NT. The script only performs a default install, with no further options given to Cygserver when running as service. Due to the wide configurability by changing the configuration file, that's typically not necessary. On Windows 9x/Me, just start Cygserver in any console window. It's advisable to redirect stderr to a file of choice (e. g. /var/log/cygserver.log) and to use the -e and -Y options or the set the appropriate settings in the configuration file (see below). On Windows NT/2000/XP or 2003, you should always run Cygserver as a service under LocalSystem account. This is the way it is installed for you by the /usr/bin/cygserver-config script. How to use the Cygserver services: The Cygserver services are used by Cygwin applications only if you set the environment variable CYGWIN to contain the string "server". You must do this before starting the application. Typically, you don't need any other option, so it's ok to set CYGWIN just to "server". It is not necessary to set the CYGWIN environment variable prior to starting the Cygserver process itself, but it won't hurt to do so. The easiest way is to set the environment variable CYGWIN to the values you want in the Windows system environment and to reboot the machine. This is advisable, since it allows you to set the variable once and then forget about it. It also ensures that services as well as desktop applications have the same setting. If you don't want that for whatever reason, you can set the variable in the /cygwin.bat file which is used in the net distribution, to start a Cygwin bash from the desktop. In that file, you can set the CYGWIN variable using Windows command line interpreter syntax, e. g.: set CYGWIN=server If you don't set CYGWIN in the system environment, but you're running other Cygwin services, these services need to get that CYGWIN value by setting the environment using the appropriate cygrunsrv option '-e' when installing the service. Example installing a service 'foo': cygrunsrv -I foo -p /usr/sbin/foo -e "CYGWIN=server" The Cygserver configuration file: Cygserver has many options, which allow to customize the server to your needs. Customization is accomplished by editing the configuration file, which is by default /etc/cygserver.conf. This file is read only once on startup of Cygserver. There's no option to re-read the file on runtime by, say, sending a signal to Cygserver. The configuration file determines how Cygserver operates. There are options which set the number of threads running in parallel, options for setting how and what to log and options to set various maximum values for the IPC services. The default configuration file delivered with Cygserver is installed to /etc/defaults/etc. The /usr/bin/cygserver-config script copies it to /etc, giving you the option to overwrite an already existing file or to leave it alone. Therefore, the /etc file is safe to be changed by you, since it will not be overwritten by a later update installation. The default configuration file contains many comments which describe everything needed to understand the settings. A comment at the start of the file describes the syntax rules for the file. The default options are shown in the file but are commented out. It is generally a good idea to uncomment only options which you intend to change from the default values. Since reading the options file on Cygserver startup doesn't take much time, it's also considered good practice to keep all other comments in the file. This keeps you from searching for clues in other sources. If you have problems with Cygserver, or you have found a bug, or you think you have found a bug, or you don't understand configuration file options, the mailing list is the right place to ask questions. Have fun!